How do I Open the Trunk of a Chevrolet HHR With Dead Battery?

If you find yourself with a dead battery in your Chevrolet HHR and unable to open the trunk, don’t worry – we’ve got you covered! There are several methods you can try to access your trunk without a functioning battery. In this guide, we’ll walk you through each method step by step, so you can get your trunk open and retrieve your belongings.

Key Takeaways:

  • To manually access the trunk, locate the removable trim plug in the liftgate and use a thin flat tool or key to push the release lever.
  • If manual access doesn’t work, try jump-starting the car to activate the trunk release.
  • Using a small 12V battery and jumper wires can also help activate the rear liftgate switch from outside the car.
  • As a last resort, breaking a window can grant access to the trunk, but it should only be done if all other methods fail.
  • Remember that breaking a window can be costly, so consider it as a last option.

Now, let’s dive into each method in detail and help you get your Chevrolet HHR trunk open!

Manually Accessing the Trunk

When faced with a dead battery, one option to open the trunk of your Chevrolet HHR is by manually accessing it from inside the car. To do this, you will need to locate the removable trim plug in the liftgate. This plug leads to a release lever that can unlock the trunk for you.

Start by removing the trim plug carefully. It can be found on the inside of the liftgate, near the bottom. Once removed, you will see the release lever. Using a thin flat tool or key, gently push on the lever. You should hear the latch release.

After releasing the latch, replace the trim plug back into its original position. Then, simply push the liftgate to open it. Voila! You have successfully accessed the trunk of your Chevrolet HHR.

Manually Accessing the Trunk – Step by Step:

  1. Locate the removable trim plug in the liftgate.
  2. Remove the trim plug carefully.
  3. Use a thin flat tool or key to push on the release lever.
  4. Replace the trim plug in its original position.
  5. Push the liftgate to open and access the trunk.

By following these steps, you can open the trunk of your Chevrolet HHR even with a dead battery. Remember to take caution when handling the trim plug and use the appropriate tools to avoid any damage.

Using a Thin Flat Tool or Key

Unlocking the trunk of your Chevrolet HHR with a dead battery can be achieved by using a thin flat tool or key in a few simple steps. Inside the car, locate the removable trim plug in the liftgate. Remove this plug to reveal the release lever. Insert the thin flat tool or key into the space and push on the release lever. You should hear a click sound as the latch releases.

Once you have pushed the release lever, replace the trim plug securely. Then, go to the rear of the car and push the liftgate to open. You will now have access to the trunk of your Chevrolet HHR, allowing you to retrieve any items or perform necessary maintenance tasks.

Note: It is important to exercise caution when using a thin flat tool or key to unlock the trunk. Apply gentle pressure to avoid damaging the trim or key components of the lock system. If you encounter any resistance while pushing the release lever, do not force it. Consult a professional for further assistance.

ProsCons
– Quick and simple solution– Potential risk of damaging lock components
– Can be done without external assistance– Requires access to the interior of the car

“Unlocking the trunk of your Chevrolet HHR with a thin flat tool or key is a convenient method that allows you to regain access to your belongings or perform necessary maintenance tasks. Just remember to be cautious and gentle during the process to avoid any potential damage.”

Jump-Starting the Car

Jump-starting your Chevrolet HHR with a dead battery not only gets your car running again, but it can also provide an opportunity to access the trunk. Here’s how you can do it:

  1. Ensure both vehicles are turned off and parked close to each other, with the working car’s battery within reach of the HHR’s battery.
  2. Connect the positive (red) jumper cable clamp to the positive terminal of the HHR’s dead battery.
  3. Connect the other end of the positive jumper cable to the positive terminal of the working car’s battery.
  4. Attach the negative (black) jumper cable clamp to the negative terminal of the working car’s battery.
  5. Attach the other end of the negative jumper cable to a metal surface on the HHR’s engine, away from the battery and fuel system.
  6. Start the working car’s engine and let it run for a few minutes.
  7. Attempt to start the HHR’s engine. If it starts, keep both cars running for a while to ensure the HHR’s battery charges.
  8. Once the HHR is running, you should be able to access the trunk by using the interior trunk release or the trunk unlock button on the key fob.

Remember, jump-starting a car can be a helpful solution, but it’s important to follow these steps carefully and exercise caution when working with vehicle batteries. Always refer to your vehicle’s owner manual for specific instructions.

Now that you know how to jump-start your Chevrolet HHR and gain access to the trunk, let’s explore other methods in case jump-starting isn’t an option or doesn’t work.

Using a Small 12V Battery and Jumper Wires

In the absence of a working car battery, using a small 12V battery and jumper wires can be an effective way to activate the liftgate switch and open the trunk. This method allows you to bypass the dead battery and directly power the liftgate system. Here’s a step-by-step guide on how to do it:

  1. Start by gathering the necessary materials: a small 12V battery and a set of jumper wires. Ensure that the 12V battery has enough power to activate the liftgate switch.
  2. Locate the liftgate switch inside the trunk area, usually found near the latch mechanism. It may be labeled or easily identifiable based on its position.
  3. Connect one end of the positive jumper wire to the positive terminal of the 12V battery, then connect the other end to the positive terminal of the liftgate switch.
  4. Next, connect one end of the negative jumper wire to the negative terminal of the 12V battery, and the other end to a suitable grounding point on the car, such as a metal part of the chassis.
  5. With the connections secure, the liftgate switch should now receive power from the 12V battery. You can now press the switch to release the trunk latch and open the trunk.

Remember to exercise caution when working with electrical components and ensure that the 12V battery is properly connected to avoid any safety risks. It’s also a good idea to have a fully charged 12V battery on hand to ensure a successful trunk access.

Table: Materials Required

MaterialsDescription
Small 12V BatteryA compact battery with enough power to activate the liftgate switch.
Jumper WiresWires with appropriate connectors to establish electrical connections between the battery and the liftgate switch.

Breaking a Window as a Last Resort

While not recommended, breaking a window is a last resort option to open the trunk of your Chevrolet HHR when all other methods have failed. It is important to note that this method should only be used in emergency situations and when there are no other alternatives available.

Before attempting to break a window, it is crucial to assess the potential risks and costs involved. Breaking a window can result in damage to your vehicle, increased expenses for repairs, and potential injuries from shattered glass. Therefore, it is advisable to consult a professional locksmith or contact roadside assistance before resorting to this method.

If you decide to proceed with breaking a window, take precautions to ensure your safety. Wear protective gloves and eyewear to prevent injuries from glass fragments. Choose a window that is least likely to cause harm, such as the rear side window, to minimize the risk of injury.

Remember, breaking a window should only be considered as a last resort when all other methods have been exhausted. Consult with professionals and explore alternative options before taking this step. It is always better to seek assistance from a qualified technician who can provide the safest and most efficient solution to open the trunk of your Chevrolet HHR.

MethodDescription
Manually Accessing the TrunkRemove the trim plug in the liftgate, locate the release lever, and push it with a thin flat tool or key to unlock the trunk.
Jump-Starting the CarUse jumper cables and another vehicle with a charged battery to jump-start your Chevrolet HHR, which may activate the trunk release.
Using a Small 12V Battery and Jumper WiresConnect a small 12V battery to the rear liftgate switch with jumper wires, allowing you to activate the switch and open the trunk.

Conclusion

By following the methods outlined in this article, you should be able to open the trunk of your Chevrolet HHR even with a dead battery. If you find yourself in a situation where your battery has died and you need to access the trunk, there are several options available to you.

If you are inside the car, you can manually access the trunk by removing the trim plug in the liftgate and using a thin flat tool or key to push the release lever. Once you hear the latch release, replace the trim plug and push the liftgate to open. This method is simple and requires no additional tools.

If you are outside the car, you can try jump-starting the car to activate the trunk release. By connecting the jumper cables to another vehicle or a portable power source, you can provide the necessary charge to the battery and gain access to the trunk. Keep in mind that this method may require additional assistance or tools.

Another option is to use a small 12V battery and jumper wires to activate the rear liftgate switch from outside the car. This method requires connecting the jumper wires to the small battery and the liftgate switch, effectively mimicking the power supply from the car’s battery. This can be a useful alternative if jump-starting the car is not an option.

It’s important to note that breaking a window should only be considered as a last resort. Not only can it be costly to replace the window, but it can also pose a safety risk. If all other methods have failed and you have exhausted all options, breaking a window may be the only solution to access the trunk. However, exercise caution and consider seeking professional help if needed.

Remember, these methods should only be used in emergency situations. It’s always best to properly maintain your car’s battery and ensure it is fully charged to avoid any unforeseen issues. If you find yourself frequently experiencing dead batteries, it may be worth having your car inspected by a professional to determine the underlying cause.

Source Links

Similar Posts