How to Program a Viper 474V Remote
Programming a Viper 474V remote is a straightforward process that will enhance the security features of your vehicle. By following these simple steps, you can ensure that your remote is properly programmed and ready to use.
Key Takeaways:
- Programming a Viper 474V remote requires access to your vehicle and entering programming mode.
- Listen for chirps from the system to confirm successful activation of programming mode.
- Program desired features by holding the Valet button and selecting the function you want to program.
- Confirm programming by listening for chirps and exit programming mode by turning off the ignition.
- The Viper 474V remote can control your vehicle’s alarm system, keyless entry, and remote start (if installed).
Step 1: Access Your Vehicle
Begin by opening your driver’s side door and getting into your vehicle. Make sure you have the Viper 474V remote and the key to your vehicle with you. Once you’re inside, turn the key to the “On” position. This will allow you to start the programming process.
Step 2: Enter Programming Mode
To program the Viper 474V remote, you need to enter programming mode. This can be done using the Valet button on the remote. Press the Valet button once, twice, or three times depending on the function you want to program. Each press corresponds to a different feature. For example, one press may be for the alarm system, two presses for keyless entry, and three presses for remote start (if installed).
Step 3: Confirm Programming Activation
After entering programming mode, you need to confirm that the system has recognized your command. Listen for one, two, or three chirps from the system. Each chirp indicates that the system has acknowledged the programming activation for a specific feature. This step ensures that you are ready to proceed with the programming process.
Step 4: Program Desired Feature
Once programming mode is activated and confirmed, you can now proceed to program the desired feature on your Viper 474V remote. Push and hold the Valet button and then press the button for the specific feature you want to program. For example, if you want to program keyless entry, push and hold the Valet button and then press the keyless entry button. This will initiate the programming process for that feature.
Remember that each feature may require a different combination of button presses or sequences. Follow the instructions provided with your Viper 474V remote to ensure accurate programming.
Step 5: Confirm Programming and Exit
After programming a feature, it is crucial to confirm that the programming was successful. Listen for the chirps from the system that indicate the feature has been successfully programmed. Once confirmed, press the Valet button to exit programming mode. Finally, turn off the ignition to complete the programming process.
These instructions are similar to programming any other DEI remote. The Viper 474V remote is designed to control various features of your vehicle’s security system, including the alarm system, keyless entry, and remote start (if installed). Refer to the user manual for further details and specific programming instructions for your remote.
Step 2: Enter Programming Mode
Press the “Valet” button on your Viper 474V remote a specific number of times based on the function you want to program. This will activate the programming mode and prepare your remote for the next steps.
To program a specific feature, such as your vehicle’s alarm system or keyless entry, follow these instructions:
- Press the “Valet” button once to program the keyless entry feature.
- Press the “Valet” button twice to program the alarm system feature.
- Press the “Valet” button three times to program the remote start feature (if installed).
After pressing the “Valet” button the required number of times, you are now in programming mode and ready to proceed with the next steps.
Step 2: Enter Programming Mode
To enter programming mode, press the “Valet” button on your Viper 474V remote. The number of times you need to press the button will depend on the specific feature you want to program.
| Function | Number of “Valet” Button Presses |
|---|---|
| Keyless Entry | 1 |
| Alarm System | 2 |
| Remote Start (if installed) | 3 |
Make sure to listen for the chirps from the system that confirm successful activation of programming mode. Once you hear the chirps, you can proceed to the next step and program the desired feature.
Please note that these instructions are similar for programming other DEI remotes as well. The Viper 474V remote offers the convenience of controlling various functions like the alarm system, keyless entry, and even remote start if it is installed in your vehicle.
Step 3: Confirm Programming Activation
Listen for one, two, or three chirps from the system as confirmation of entering programming mode. This signals that the Viper 474V remote is ready to be programmed for the desired feature. Each chirp corresponds to a different number of times you pressed the “Valet” button in the previous step.
Once you hear the chirps, you can proceed to the next step, confident that you have successfully activated programming mode. Take note of the number of chirps you hear, as it will determine the subsequent programming steps.
To ensure a successful programming process, it is important to have a clear understanding of the number of chirps and their significance. Refer to the table below for a breakdown of the number of chirps and their corresponding functions:
| Number of Chirps | Function |
|---|---|
| One Chirp | Program a secondary panic or auxiliary output function |
| Two Chirps | Program a primary panic or arm/disarm function |
| Three Chirps | Program a remote start function or bypass mode |
By understanding the meaning behind each number of chirps, you can proceed with confidence to the next step in programming your Viper 474V remote. With the system now in programming mode and the desired function identified, you can move forward with customizing your remote to suit your needs.
Step 4: Program Desired Feature
Push and hold the Valet button on your Viper 474V remote, then press the button for the feature you want to program. This could be a specific alarm setting, the keyless entry function, or even the remote start option if it has been installed in your vehicle. Remember to refer to the Viper 474V remote’s user manual for a complete list of available features and their corresponding buttons.
If you are unsure which button corresponds to the feature you want to program, consult the manual or contact Viper customer support for assistance. It is essential to ensure that you are pressing the correct button to avoid programming the wrong feature.
After pressing the desired button, continue to hold down the Valet button. You will hear another series of chirps from the system to confirm that the programming is underway. These chirps indicate that the Viper 474V remote is communicating with your vehicle’s security system and successfully programming the selected feature.
Once you hear the confirmation chirps, release both buttons. This indicates that the programming is complete, and the Viper 474V remote is now programmed with the desired feature. It is important to listen for the chirps, as they serve as a confirmation that the programming was successful.
Table: Programming Features on the Viper 474V Remote
| Button Combination | Feature |
|---|---|
| 1x Press Valet, then feature button | Alarm setting 1 |
| 2x Press Valet, then feature button | Alarm setting 2 |
| 3x Press Valet, then feature button | Alarm setting 3 |
| 4x Press Valet, then feature button | Keyless entry lock |
| 5x Press Valet, then feature button | Keyless entry unlock |
| 6x Press Valet, then feature button | Remote start |
Refer to the table above for a quick reference to the available features and the corresponding button combinations required for programming them on the Viper 474V remote.
Step 5: Confirm Programming
Listen for the chirps to confirm the successful programming of your desired feature, then press the “Valet” button to exit programming mode and turn off the ignition.
Once you have completed the programming process for your Viper 474V remote, it is important to confirm that the programming was successful. The system will emit a unique number of chirps to indicate that your desired feature has been programmed.
For example, if you programmed a single chirp feature, listen for a single chirp from the system to confirm its successful programming. If you programmed a two-chirp feature, listen for two chirps, and so on. The number of chirps will vary depending on the specific feature you programmed.
After hearing the chirps, press the “Valet” button to exit programming mode. This will ensure that your remote is ready to use and that the programming process is complete. Finally, turn off the ignition to finish the programming procedure.
| Feature | Number of Chirps |
|---|---|
| Single Chirp | 1 |
| Double Chirp | 2 |
| Triple Chirp | 3 |
Additional Features and Compatibility
The Viper 474V remote offers control over various features, including the alarm system, keyless entry, and remote start (if installed), making it a versatile and convenient accessory for your vehicle’s security.
Programming the Viper 474V remote is a straightforward process that allows you to customize and enhance your vehicle’s security system. By following a few simple steps, you can program the remote to activate specific features according to your preferences.
Once programmed, the Viper 474V remote gives you the ability to remotely arm and disarm your vehicle’s alarm system, providing peace of mind and added protection against theft. Additionally, the keyless entry feature allows you to unlock and lock your vehicle with a simple press of a button, eliminating the need for traditional keys.
If your vehicle is equipped with a remote start system, the Viper 474V remote can also be programmed to start your engine remotely, allowing you to warm up or cool down your vehicle before getting in. This feature is especially useful during extreme weather conditions, ensuring your comfort and convenience.
Designed by DEI, a trusted brand in automotive security systems, the Viper 474V remote is compatible with a wide range of vehicles, making it a popular choice among car owners. Its user-friendly interface and reliable performance make it an essential accessory for anyone looking to upgrade their vehicle’s security and convenience.
