How to Replace a Full Side View Mirror on a Toyota Avalon

Replacing a full side view mirror on your Toyota Avalon is a simple task that you can easily do yourself. Not only will you save money on labor charges, but you’ll also make your car repairs hassle-free. In this article, we will provide step-by-step instructions on how to replace your side view mirror, allowing you to complete the job with confidence.

Key Takeaways:

  • Replacing a full side view mirror on a Toyota Avalon can save you money on labor charges.
  • Follow our step-by-step instructions for a hassle-free DIY car repair.
  • Removing the old side view mirror involves opening the door, removing the black triangular molding, and unplugging the electrical power.
  • Installing the new side view mirror includes inserting it into place, tightening the nuts, and plugging it back into the wire harness.
  • Finalize the replacement by checking the power, replacing foam plugs, snapping the molding, and adjusting the mirror for optimal visibility.

Removing the Old Side View Mirror

To begin replacing your side view mirror, you need to first remove the old mirror from your Toyota Avalon. This is a relatively simple process that can be done with a few tools and a little bit of patience. Here’s a step-by-step guide on how to do it:

  1. Open the door on the side you’re replacing and power down the window.
  2. Locate the black triangular molding that covers the inside of the mirror.
  3. Using a prying tool, gently pry off the triangular molding to expose the mirror studs and nuts.
  4. Remove the foam rubber plugs to fully expose the mirror studs and nuts.
  5. Unplug the electrical power by disconnecting the wire harness.
  6. Using a ratchet and socket, remove the nuts that hold the mirror in place.
  7. Gently pry the mirror downward from the outside of the door and extract it.

Once you have successfully removed the old side view mirror, you can proceed to the next step of installing the new mirror.

Table 1: Tools Needed for Removing the Old Side View Mirror

ToolDescription
Prying toolUsed to pry off the black triangular molding
Ratchet and socketUsed to remove the mirror studs and nuts

Now that you know how to remove the old side view mirror, you’re one step closer to completing the replacement process. Stay tuned to learn how to install the new mirror and finalize the replacement!

Installing the New Side View Mirror

Once you have removed the old side view mirror, it’s time to install the new mirror on your Toyota Avalon. Follow these step-by-step instructions to ensure a smooth and hassle-free installation.

1. Insert the new mirror and studs into place, aligning them with the holes in the door. Make sure the mirror is securely positioned.

2. Thread the nuts onto the mirror studs and tighten them using a ratchet and socket. Ensure that the nuts are securely fastened to prevent any movement.

3. Plug the mirror back into the wire harness, ensuring that the connection is secure. This will restore power to the mirror and enable the control functions.

4. Carefully tuck the mirror and wire harness into the door cavity, making sure they are neatly tucked away and not obstructing any moving parts.

Table: Tools Required for Mirror Installation

ToolFunction
RatchetTighten nuts on mirror studs
SocketFit onto the ratchet for tightening nuts
Wire HarnessEnables power connection for mirror
ScrewdriverUsed for prying and removing old mirror

With these simple steps, you have successfully installed your new side view mirror on your Toyota Avalon. Make sure to check the power to the mirror, replace any foam plugs that were removed, and snap the triangular molding back into place. Finally, adjust the mirror to your desired position for optimal visibility. Congratulations on completing this DIY car repair!

Finalizing the Replacement

With the new side view mirror installed, you’re almost done! Just a few more steps to finalize the replacement on your Toyota Avalon. Let’s make sure everything is in place and working smoothly.

Check the Power

First, check if the power to the mirror is functioning properly. Sit in the driver’s seat and adjust the mirror using the control panel. Ensure that you can move the mirror up, down, left, and right smoothly. If there are any issues, double-check the connections and make sure the mirror is securely plugged into the wire harness.

Replace Foam Plugs and Snap Triangular Molding

Next, replace the foam rubber plugs that cover the mirror studs and nuts. These plugs help protect the internal components from dust and moisture, so it’s essential to put them back in place. Once the plugs are secure, snap the black triangular molding back into position to cover the inside of the mirror. This molding provides a clean and finished look.

Adjust the Mirror

The final step is to adjust the mirror to ensure optimal visibility. Sit in the driver’s seat and make small adjustments to the mirror until you have a clear view of the surrounding traffic. Take your time to find the ideal position that allows you to see both the side and rear of your vehicle.

Final Steps Checklist:
Check power to the mirror
Replace foam rubber plugs
Snap triangular molding back into place
Adjust the mirror for optimal visibility

By following these simple yet crucial final steps, you can ensure that your side view mirror replacement on your Toyota Avalon is complete. Take pride in your DIY car repair skills and enjoy the benefits of saving money on labor charges. Now, you can confidently hit the road with a fully functional side view mirror!

Congratulations!

You have successfully replaced the full side view mirror on your Toyota Avalon, saving money on labor charges and making your car repairs hassle-free.

Replacing a full side view mirror on a Toyota Avalon is a relatively simple task that you can do yourself. By following the step-by-step instructions mentioned in this article, you were able to remove the old mirror and install a new one without any major difficulties.

To remove the old mirror, you started by opening the door and powering down the window on the side you were replacing. Then, you located and pried off the black triangular molding covering the inside of the mirror. By removing the foam rubber plugs, you exposed the mirror studs and nuts, and unplugged the electrical power. Using a ratchet and socket, you were able to remove the nuts and gently pry the mirror downward from the outside of the door.

Now, to install the new mirror, you inserted it and the studs into place and threaded on the nuts. With the help of the ratchet, you tightened the nuts securely. You then plugged the mirror back into the wire harness and tucked it into the door cavity. After performing a final check to ensure the power to the mirror and replacing the foam plugs, you snapped the triangular molding back into place. Finally, you made any necessary adjustments to the mirror for optimal visibility.

By completing this side view mirror replacement yourself, you not only saved money on labor charges but also gained the satisfaction of successfully performing a DIY car repair. Remember, always follow proper safety precautions and consult your vehicle’s manual for specific instructions. Enjoy the benefits of your newly replaced side view mirror on your Toyota Avalon!

Source Links

Similar Posts