How to Replace the Fuel Pump Relay on a 2002 Civic

Is your 2002 Civic experiencing fuel pump relay issues? Learn how to replace it with our easy-to-follow guide.

Key Takeaways:

  • Replacing the fuel pump relay on a 2002 Civic is a simple process that can be done at home.
  • To access the relay, you’ll need to remove the glove box from your Honda Civic.
  • The fuel pump relay, also known as the PGM-FI relay No. 2, can be found on the right side of the glove box cavity.
  • When replacing the relay, ensure the prongs of the new relay are properly aligned with the slots in the receptacle.
  • After replacing the fuel pump relay, reattach the glove box and insert the stoppers until they snap into place.

Removing the Glove Box

To begin replacing the fuel pump relay on your 2002 Civic, you’ll first need to remove the glove box. Follow these simple steps:

  1. Open the glove box and locate the stoppers on either side.
  2. Gently remove the stoppers by pulling them out.
  3. Let the glove box hang by its lower hinges, allowing you access to the interior.

Once the glove box is opened, you can proceed to the next step of replacing the fuel pump relay.


Locating the Fuel Pump Relay

With the glove box removed, you can now locate the fuel pump relay. Here’s how:

  1. Look inside the glove box cavity and find the two relays side by side.
  2. Identify the PGM-FI relay No. 2, which is also the fuel pump relay.
  3. This relay is located on the right side of the two relays inside the cavity.

Now that you’ve located the fuel pump relay, you’re ready to replace it with a new one.


Replacing the Fuel Pump Relay

Follow these steps to replace the fuel pump relay:

  1. Wiggle the old relay out of its receptacle, being careful not to damage any surrounding components.
  2. Take the new fuel pump relay and line up the prongs with the slots in the receptacle.
  3. Press the new relay firmly into place until it is securely seated.

By replacing the fuel pump relay, you’ll ensure the proper functioning of your vehicle’s fuel pump.


Finishing Up

Finally, it’s time to put everything back together. Here’s how to finish up the process:

  1. Lift the glove box back up and align it with the hinges.
  2. Insert the stoppers back into their respective positions and push them in until they snap into place.

With the glove box reinstalled and the fuel pump relay replaced, you’ve successfully completed the necessary steps to ensure your 2002 Civic is road-ready. Enjoy the smooth functioning of your fuel pump!

StepInstructions
1Remove the stoppers on either side of the glove box.
2Let the glove box hang by its lower hinges.
3Locate the PGM-FI relay No. 2, which is the fuel pump relay, inside the glove box cavity.
4Wiggle out the old fuel pump relay from its receptacle.
5Insert the new fuel pump relay by aligning the prongs with the slots in the receptacle and pressing it firmly.
6Lift the glove box back up and reinsert the stoppers until they snap into place.

Locating the Fuel Pump Relay

After removing the glove box, you’ll find the fuel pump relay located inside the glove box cavity. To access it, first, open the glove box and remove the stoppers on either side. This will allow the glove box to hang by its lower hinges, giving you clear access to the relay.

Once you have a clear view, you’ll notice two relays side by side inside the glove box cavity. The fuel pump relay, also known as the PGM-FI relay No. 2, is the one located on the right. It is essential to identify the correct relay to ensure a successful replacement.

To replace the fuel pump relay, wiggle the old relay out of its position. Then, take the new relay and line up the prongs with the slots in the receptacle. Press the new relay firmly into place to ensure a secure connection. With the new relay installed, you have successfully located and replaced the fuel pump relay in your 2002 Honda Civic.

StepAction
1Open the glove box and remove the stoppers on either side.
2Let the glove box hang by its lower hinges.
3Locate the two relays inside the glove box cavity.
4Identify the fuel pump relay, PGM-FI relay No. 2, located on the right.
5Wiggle the old relay out and remove it.
6Line up the prongs of the new relay with the slots in the receptacle.
7Press the new relay firmly into place.
8Lift the glove box back up and insert the stoppers until they snap into place.

Replacing the Fuel Pump Relay

With the fuel pump relay in hand, you can now proceed to replace it in your 2002 Honda Civic. Follow these step-by-step instructions to ensure a successful replacement:

  1. Open the glove box by pulling the lever on the left side.
  2. Remove the stoppers located on either side of the glove box by gently pressing them inward and pulling them out.
  3. Let the glove box hang freely by its lower hinges. Take a moment to locate the two relays inside the glove box cavity.
  4. The fuel pump relay, also known as the PGM-FI relay No. 2, is situated on the right side of the two relays.
  5. Gently wiggle the fuel pump relay to loosen it from the receptacle.
  6. With the old relay removed, take the new fuel pump relay and line up the prongs with the slots in the receptacle.
  7. Press the new relay firmly into place until it is securely seated.
  8. Lift the glove box back up and insert the stoppers until they snap into place.

Once you’ve completed these steps, you have successfully replaced the fuel pump relay in your 2002 Honda Civic. Now, you can be confident in the proper functioning of your fuel pump and enjoy a smooth and reliable driving experience.

StepDescription
1Open the glove box.
2Remove the stoppers on either side of the glove box.
3Let the glove box hang by its lower hinges.
4Locate the two relays inside the glove box cavity.
5Identify the fuel pump relay on the right side of the two relays.
6Wiggle the fuel pump relay to remove it from the receptacle.
7Line up the prongs of the new relay with the slots in the receptacle.
8Press the new relay firmly into place.
9Lift the glove box back up and insert the stoppers until they snap into place.

Finishing Up

Congratulations! You’ve successfully replaced the fuel pump relay in your 2002 Honda Civic. Now, let’s put everything back together for a smooth finish.

Start by lifting the glove box back up and reinserting the stoppers until they snap into place. Make sure they are secure and hold the glove box in its original position.

Next, carefully lower the glove box back down and align the hinges with the lower brackets. Gently push the glove box inwards until it is flush with the dashboard.

Finally, take a moment to double-check all connections and ensure that everything is properly secured. Test the fuel pump to confirm that it is functioning correctly.

With the fuel pump relay replacement complete, you can now enjoy a reliable and efficient fuel system in your 2002 Honda Civic. Safe travels!

Source Links

Similar Posts