How to Replace the Keyless Remote on a 2006 Pontiac

Replacing the keyless remote on your 2006 Pontiac is a simple process that can be done with the help of a video tutorial and a new battery. By following the instructions carefully, you can have your keyless remote working again in no time.

Key Takeaways:

• Replacing the keyless remote on a 2006 Pontiac is a straightforward process.
• A video tutorial can guide you through the steps.
• Be cautious to avoid damaging the remote or injuring yourself.
• The key fob battery required is a CR2032.
• The part number for the key fob remote is 22733524.
• Consider a professional remote programming option if you prefer assistance.

How to Open the Keyless Remote on Your 2006 Pontiac

Before you can replace the battery, you’ll need to know how to open the keyless remote on your 2006 Pontiac. Following these simple steps will allow you to access the battery compartment safely and efficiently.

1. Start by locating the small notch on the side of the keyless remote. This is usually located near the key ring attachment. Use your fingernail or a small flathead screwdriver to gently pry open the remote.
2. Once the remote is opened, you’ll notice a small compartment where the battery is housed. Be careful not to force the remote open, as this may cause damage. Use a gentle and steady amount of pressure to avoid any mishaps.
3. Next, remove the old battery from the compartment. The battery is typically a round, silver disc, and it may be held in place by a small clip or spring. Carefully release the clip or spring and lift out the battery. Remember to dispose of the old battery responsibly.

Now that you have successfully opened the keyless remote, you can proceed to replace the battery. Ensure that you have the correct replacement battery – a CR2032 – before continuing with the battery replacement process. With the new battery in hand, simply place it into the compartment, making sure the positive (+) side is facing up. Once the new battery is securely in place, gently close the keyless remote until it snaps shut.

Remember, it’s essential to exercise caution while handling the keyless remote to prevent any damage. Take your time and follow the instructions carefully to ensure a successful battery replacement process.

Table: Keyless Remote Opening Steps

Replacing the Battery in the Keyless Remote

Once you have opened the keyless remote, you can proceed to replace the battery in your 2006 Pontiac. It is important to use caution during this process to avoid damaging the remote or hurting yourself. The battery required for the key fob is a CR2032, which is a common type of battery readily available at most stores.

To replace the battery, follow these simple steps:

1. Locate the battery compartment on the keyless remote. It is usually on the backside of the remote.
2. Using your fingers or a small screwdriver, carefully pry open the battery compartment cover.
3. Remove the old battery from the compartment and dispose of it properly.
4. Insert the new CR2032 battery into the compartment, making sure it is properly aligned with the positive (+) and negative (-) markings.
5. Close the battery compartment cover, ensuring it is securely fastened.

Once the new battery is in place, your keyless remote should be ready to use. It is recommended to test the remote to ensure it is functioning properly before closing the battery compartment cover. If you encounter any issues or difficulties during the battery replacement process, it may be helpful to consult a professional or refer to the vehicle’s owner’s manual for further guidance.

Understanding the Part Number

The part number for the key fob remote of your 2006 Pontiac is essential for ensuring you get the correct replacement. This unique identifier helps you find the exact match for your specific vehicle model and year. It is important to note down this part number, 22733524, before purchasing a new key fob remote.

Locating the Part Number

The part number can be found on the back of your existing key fob remote. It is typically engraved or printed on a small label. Make sure to check both the front and back for any additional markings or labels that may indicate the part number. It is crucial to have this information ready when searching for a replacement.

Importance of the Part Number

Having the correct part number ensures that the replacement key fob remote will be compatible with your 2006 Pontiac. Each vehicle model may have different key fob remote specifications, and using the wrong part number can lead to compatibility issues and malfunctioning remotes. By using the accurate part number, you can confidently purchase the right replacement remote.

Professional Remote Programming Options

If you prefer to have a professional handle the programming of your keyless remote, there are key fob installers in your area who can assist you with your 2006 Pontiac. These professionals have the expertise and specialized equipment to program the remote accurately and efficiently, ensuring that it functions correctly with your vehicle. By entrusting the programming to a professional, you can save time and avoid potential complications.

When searching for a key fob installer, consider reaching out to local automotive locksmiths or car dealerships that offer key fob programming services. These establishments often have trained technicians who can program the remote for you. You may also find specialized key fob installers or automotive electronics shops that specialize in remote programming and can provide you with excellent service.

Before making a decision, it’s a good idea to research and compare different service providers in your area. Look for reputable businesses with positive customer reviews and competitive pricing. You can also check if the installer offers additional services such as key cutting or replacement, in case you need any other key-related assistance for your 2006 Pontiac.

Table 1: Key Fob Installer Comparison

Once you have selected a key fob installer, contact them to schedule an appointment. Before visiting their location, make sure to inquire about any specific requirements or documents you need to bring along, such as proof of ownership for your 2006 Pontiac. This will help ensure a smooth and efficient process.

By opting for professional remote programming, you can have peace of mind knowing that your keyless remote will be programmed correctly and function properly with your 2006 Pontiac. Whether you choose to tackle the programming yourself or seek assistance from a professional, with the right guidance and resources, you’ll soon have a fully functional keyless remote for your vehicle.

Conclusion and Final Steps

Now that you have the knowledge and information needed, you can confidently replace the keyless remote on your 2006 Pontiac. Follow the instructions provided in the video tutorial to open the keyless remote and replace the battery. Remember to exercise caution to avoid damaging the remote or causing any harm to yourself.

The battery required for the key fob remote is a CR2032, which you can easily find in most stores. Make sure to use the correct battery type to ensure optimal performance. Additionally, take note of the part number for the key fob remote, which is 22733524. This information will be useful if you need to purchase a replacement remote in the future.

If you would prefer to have a professional handle the programming of the keyless remote for you, consider searching for a key fob installer in your area. These professionals have the expertise and tools necessary to program the remote correctly, ensuring it functions seamlessly with your 2006 Pontiac.

By following these final steps and considering your options, you can successfully replace the keyless remote on your 2006 Pontiac. Enjoy the convenience and security that comes with a fully functional key fob remote!

Source Links

• https://www.keylessentryremotefob.com/blog/2014/11/how-to-replace-pontiac-g6-key-fob.html