How to Reprogram an Avital Key Fob

Reprogramming your Avital key fob is a simple process that can be done in just a few easy steps. Follow our step-by-step guide to ensure a seamless process and get your key fob programmed in no time.

 

Key Takeaways:

  • Reprogramming your Avital key fob is a simple process that can be completed in a few easy steps.
  • Enter your vehicle, leave the driver’s door open, and insert the key into the ignition.
  • Activate the valet button to initiate the reprogramming or troubleshooting process.
  • Engage programming mode for your Avital key fob by holding the valet switch.
  • Select the button you want to program (lock, unlock, or remote start).
  • Troubleshoot your Avital remote start system by activating resync mode and following the steps.
  • Remember to check the battery of your remote control if you are experiencing any issues.

Reprogramming an Avital Key Fob – Step 1: Enter Vehicle and Activate Valet Button

To begin reprogramming your Avital key fob, enter your vehicle and make sure the driver’s door is open. Insert the key into the ignition and proceed to the next step.

Now, it’s time to activate the valet button on your Avital key fob. This step is crucial as it allows you to access the programming mode. Here’s how to do it:

  1. Turn the key to the “On” position, where all the dashboard lights are illuminated.
  2. Locate the valet button on your Avital key fob. It is usually a small black button with the Avital logo on it.
  3. Press the valet button once if you want to program the alarm or press it twice for trunk programming.

By following these steps, you have successfully entered programming mode and activated the valet button on your Avital key fob. Now, you are ready to move on to the next step.

Important note:

If you encounter any difficulties during this process, please refer to the user manual or seek assistance from a professional.

StepInstructions
Step 1Enter the vehicle and leave the driver’s door open.
Step 2Insert the key into the ignition and turn it to the “On” position.
Step 3Locate the valet button on the Avital key fob and press it once for alarm programming or twice for trunk programming.

Once you have completed these steps, you are now ready to move on to step two of reprogramming your Avital key fob. Stay tuned!

Reprogramming an Avital Key Fob – Step 2: Engage Programming Mode and Select Button

Once you have activated the valet button, it’s time to engage programming mode. Hold down the valet switch until you hear the system’s siren chirp. This signifies that the system is now in programming mode and ready to accept the new button selection.

To select the button you want to program, simply press the desired button on your Avital key fob. Whether you want to program the lock, unlock, or remote start button, make sure to press it firmly and hold it down for a few seconds. This action communicates your selection to the system.

If you are unsure which button on your key fob corresponds to the function you want to program, refer to the user manual or consult Avital’s website for guidance. It’s important to choose the correct button to ensure the desired functionality is programmed correctly.

Summary:

  • Activate programming mode by holding down the valet switch until the system’s siren chirps.
  • Select the button you want to program by pressing it firmly and holding it down.
StepAction
2.1Hold down valet switch until system’s siren chirps.
2.2Press and hold the desired button on the key fob.

By following these steps, you can successfully engage programming mode for your Avital key fob and select the specific button you want to program. This will ensure that your key fob is correctly programmed and ready to operate your Avital system with ease.

Troubleshooting Avital Remote Start System

If you’re having trouble with your Avital remote start system, don’t worry. You can troubleshoot it by following these simple steps:

  1. Enter your car, leaving the driver’s door open and inserting the key into the ignition.
  2. Activate the valet button by turning the key to the “On” position and pressing the valet button on the remote control.
  3. Activate resync mode by holding the valet switch until the system’s siren chirps and the LED lights blink.
  4. Activate the remote start system by pressing the starter button on your remote while still holding the valet switch.
  5. Confirm the troubleshooting process by waiting for another chirp and then releasing both buttons. Your Avital remote start system should now be resynced and operational.

Remember to check the battery of your remote control and replace it if necessary for optimal performance.

Table: Troubleshooting Steps

StepDescription
1Enter your car, leaving the driver’s door open and inserting the key into the ignition.
2Activate the valet button by turning the key to the “On” position and pressing the valet button on the remote control.
3Activate resync mode by holding the valet switch until the system’s siren chirps and the LED lights blink.
4Activate the remote start system by pressing the starter button on your remote while still holding the valet switch.
5Confirm the troubleshooting process by waiting for another chirp and then releasing both buttons. Your Avital remote start system should now be resynced and operational.

By following these troubleshooting steps, you can address any issues with your Avital remote start system and get it back to full functionality. Remember, a properly functioning remote start system enhances your convenience and comfort when starting your vehicle.

Troubleshooting Avital Remote Start System – Step 1: Enter Vehicle and Activate Valet Button

To begin troubleshooting your Avital remote start system, enter your car and ensure the driver’s door is open. Insert the key into the ignition and proceed to the next step.

Step 2 requires you to activate the valet button on the remote control. Turn the key to the “On” position and press the valet button. This will allow you to access the necessary functions to troubleshoot your Avital remote start system.

Once you have activated the valet button, move on to step 3. To engage resync mode, continue holding the valet switch until the system’s siren chirps. At the same time, you will notice the LED lights blinking, indicating that the system is ready for troubleshooting.

Now it’s time for step 4. While still holding the valet switch, activate the remote start system by pressing the starter button on your remote control. This will initiate the troubleshooting process and help you identify any issues with your Avital remote start system.

Finally, in step 5, you need to confirm the troubleshooting process. Wait for another chirp from the system and then release both the valet switch and the starter button on your remote control. This will indicate that the troubleshooting is complete and your Avital remote start system should now be resynced and operational.

Remember, for optimal performance, check the battery of your remote control and replace it if necessary. Now you can enjoy the convenience and functionality of your Avital remote start system without any issues!

Source Links

Similar Posts