How to Reset the MAINTENANCE REQUIRED Dashboard

Are you wondering how to reset the MAINTENANCE REQUIRED dashboard on your vehicle? Follow these simple steps to get back on the road with ease and confidence.

Key Takeaways:

  • To reset the MAINTENANCE REQUIRED dashboard on Toyota vehicles, turn the key to the on position, make sure the odometer reading is displayed, turn the key back off, push and hold the reset button for the trip meters, and continue holding the reset button until the odometer reading returns.
  • For Honda vehicles, turn the ignition to the run position, press the Select/Reset button on the steering wheel or dash, scroll or press the knob to display “Engine Oil Life” or “Engine Oil Indicator %,” hold the Select/Reset button until the indicator blinks, and press the necessary buttons to reset the oil life to 100%.
  • For Hyundai / Kia vehicles, start the engine, press and hold the OK button on the steering wheel to reset the service required indicator, access the service interval mode through the steering wheel controls, and set the desired interval.
  • For Chevrolet vehicles without VIC, sit inside the driver’s seat, insert the key into the ignition and turn it to the accessory power position, depress the accelerator pedal fully to the floor three times within five seconds, and wait for the change oil light to go out.
  • For Ford vehicles, place the transmission into park or first gear, turn the ignition to the on position, press and release the trip/reset button until the display shows “OIL LIFE = XXX% HOLD RESET,” hold the trip/reset button until the display reads “OIL LIFE SET TO 100%,” and turn the ignition off.

Please note that these instructions may vary depending on the specific make, model, and year of your vehicle. It is always recommended to consult the owner’s manual for accurate instructions.

Resetting the MAINTENANCE REQUIRED Dashboard on Toyota Vehicles

If you own a Toyota vehicle and need to reset the MAINTENANCE REQUIRED dashboard, here’s what you need to do:

  1. Turn the key to the on position.
  2. Make sure the odometer reading is displayed.
  3. Turn the key back off.
  4. Push and hold the reset button for the trip meters.
  5. While continuing to depress the reset button, turn the key back to the “on” position. The odometer display should show dashes that disappear one by one. When they’ve all disappeared, a series of zeros will display. Continue holding the reset button until all the zeros clear and the odometer reading returns.

Please note that these instructions may vary depending on the specific model and year of your Toyota vehicle. It is always recommended to consult the owner’s manual for accurate instructions.

For more information on resetting the MAINTENANCE REQUIRED dashboard on other vehicle makes and models, please refer to the relevant sections in this article.

Table: Resetting the MAINTENANCE REQUIRED Dashboard on Toyota Vehicles

StepInstructions
1Turn the key to the on position.
2Make sure the odometer reading is displayed.
3Turn the key back off.
4Push and hold the reset button for the trip meters.
5While continuing to depress the reset button, turn the key back to the “on” position. The odometer display should show dashes that disappear one by one. When they’ve all disappeared, a series of zeros will display. Continue holding the reset button until all the zeros clear and the odometer reading returns.

Remember to always follow the specific instructions for your Toyota vehicle, as the steps may vary. Resetting the MAINTENANCE REQUIRED dashboard is an important maintenance task to ensure your vehicle is kept in optimal condition.

Resetting the MAINTENANCE REQUIRED Dashboard on Honda Vehicles

Honda vehicle owners can easily reset the MAINTENANCE REQUIRED dashboard by following these instructions:

  1. Turn the ignition to the run position (one click before starting the engine).
  2. Press the Select/Reset button on the steering wheel or as a knob on the dash.
  3. Scroll or press the knob repeatedly until “Engine Oil Life” or “Engine Oil Indicator %” is displayed.
  4. Hold the Select/Reset button for 10 seconds until the Engine Oil Indicator blinks.
  5. If the display reads “Engine Oil Life,” press the Info button on the steering wheel to enter Reset mode. Then press the Select/Reset button to set the oil life to 100%.

These simple steps will ensure that the MAINTENANCE REQUIRED dashboard is reset and ready for the next service interval. It is important to note that the instructions provided may vary depending on the specific Honda make, model, and year of your vehicle. For accurate instructions, it is always recommended to consult the owner’s manual.

For more detailed instructions on resetting the MAINTENANCE REQUIRED dashboard on other makes and models of vehicles, please refer to the corresponding sections in this article.

Summary:

Honda vehicle owners can easily reset the MAINTENANCE REQUIRED dashboard by following these instructions:

  1. Turn the ignition to the run position.
  2. Press the Select/Reset button on the steering wheel or dash.
  3. Scroll or press the knob until “Engine Oil Life” or “Engine Oil Indicator %” is displayed.
  4. Hold the Select/Reset button for 10 seconds until the Engine Oil Indicator blinks.
  5. If the display reads “Engine Oil Life,” press the Info button on the steering wheel to enter Reset mode. Then press the Select/Reset button to set the oil life to 100%.

Always consult the owner’s manual for accurate instructions, as they may vary depending on the specific Honda make, model, and year of your vehicle.

Table: Maintenance Reset Instructions for Honda Vehicles

Vehicle MakeReset Instructions
HondaTurn the ignition to the run position. Press the Select/Reset button on the steering wheel or dash. Scroll or press the knob until “Engine Oil Life” or “Engine Oil Indicator %” is displayed. Hold the Select/Reset button for 10 seconds until the Engine Oil Indicator blinks. If the display reads “Engine Oil Life,” press the Info button on the steering wheel to enter Reset mode. Then press the Select/Reset button to set the oil life to 100%.

Resetting the MAINTENANCE REQUIRED Dashboard on Hyundai / Kia Vehicles

If you drive a Hyundai or Kia vehicle and need to reset the MAINTENANCE REQUIRED dashboard, here’s what you should do:

  1. Start the engine.
  2. If the display shows “Service required,” press and hold the OK button on the steering wheel for more than 1 second to reset.
  3. To access the service interval mode, press the MODE button on the steering wheel to highlight the INFORMATION menu.
  4. Press the OK button to access the menu and use the directional keypad to turn on the SERVICE INTERVAL mode and set the desired interval.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Please note that these steps may vary depending on the specific make, model, and year of your Hyundai or Kia vehicle. It is always recommended to consult the owner’s manual for accurate instructions.

MakeModelYear
HyundaiTucson2020
KiaSportage2019
HyundaiSonata2021

Important Note:

Always refer to the specific instructions provided in your vehicle’s owner’s manual for accurate information on resetting the MAINTENANCE REQUIRED dashboard. Failure to follow the correct procedure could result in incorrect readings or warnings.

Resetting the MAINTENANCE REQUIRED Dashboard on Chevrolet Vehicles (without VIC)

Chevrolet vehicle owners can reset the MAINTENANCE REQUIRED dashboard easily by following these steps:

  1. Sit inside the driver’s seat and close the driver’s side door.
  2. Insert the key into the ignition and turn it to the accessory power position.
  3. Depress the accelerator pedal fully to the floor three times within five seconds.
  4. The change oil light should flash and then go out. If it remains on, retry the procedure.
  5. Start the engine and wait for all the illuminated instrument panel lights to go out to ensure the change oil light has been reset.

Please note that these instructions may vary depending on the specific make, model, and year of your Chevrolet vehicle. It is always recommended to consult the owner’s manual for accurate instructions.

Make/ModelResetting Procedure
Chevrolet CruzeFollow the steps outlined above.
Chevrolet MalibuFollow the steps outlined above.
Chevrolet EquinoxFollow the steps outlined above.

Additional Notes

If you are unable to reset the MAINTENANCE REQUIRED dashboard on your Chevrolet vehicle, it is recommended to visit a certified Chevrolet dealership or authorized service center for assistance.

Regular maintenance is essential to keep your vehicle in optimal condition. Resetting the MAINTENANCE REQUIRED dashboard ensures accurate tracking of your vehicle’s maintenance schedule and helps you stay on top of necessary service intervals.

Remember, proper maintenance prolongs the life of your vehicle and contributes to its overall performance and safety. Take care of your Chevrolet and enjoy the peace of mind that comes with a well-maintained vehicle.

MakeModelYear
ChevroletCruze2021
ChevroletMalibu2020
ChevroletEquinox2019

Resetting the MAINTENANCE REQUIRED Dashboard on Ford Vehicles

If you own a Ford vehicle and need to reset the MAINTENANCE REQUIRED dashboard, follow these simple steps:

  1. Place the transmission into park or first gear (manual) and apply the parking brake. Turn off the engine.
  2. Turn the ignition to the on position, but do not start the engine.
  3. Press and release the trip/reset button until the display shows “OIL LIFE = XXX% HOLD RESET.”
  4. Hold the trip/reset button until the display reads “OIL LIFE SET TO 100%.”
  5. Turn the ignition to the off position. Start the engine to verify that the oil change required message is no longer displayed.

Resetting the MAINTENANCE REQUIRED dashboard is an easy process for Ford vehicles. By following these steps, you can clear the dashboard message and ensure your vehicle is properly maintained. It is important to reset the dashboard after every oil change or scheduled maintenance to keep track of when the next service is due.

Please note that these instructions may vary depending on the specific make, model, and year of your Ford vehicle. If you are unsure or encounter any difficulties, it is always recommended to consult the owner’s manual for accurate instructions.

Table: Ford Vehicle Models and Resetting Procedure

ModelResetting Procedure
Ford FusionFollow the steps outlined above.
Ford MustangFollow the steps outlined above.
Ford ExplorerFollow the steps outlined above.

Keep in mind that different Ford models may have slight variations in the resetting procedure. It is always advisable to refer to the owner’s manual for your specific vehicle to ensure the correct steps are followed.

Resetting the MAINTENANCE REQUIRED Dashboard on Chrysler Vehicles (2014-2015)

If you drive a Chrysler vehicle from 2014 to 2015 and need to reset the MAINTENANCE REQUIRED dashboard, here’s what you need to know.

To reset the MAINTENANCE REQUIRED dashboard on your Chrysler vehicle from 2014 to 2015, follow these steps:

  1. Turn the car on.
  2. Use the arrows on the left side of the steering wheel to find “Vehicle Info.”
  3. Use the left/right arrows to find “Oil Life Remaining.”
  4. Press and hold the OK button until the oil life returns to 100 percent.

By following these steps, you can easily reset the MAINTENANCE REQUIRED dashboard on your Chrysler vehicle from 2014 to 2015. However, it is important to note that these instructions may vary depending on the specific model and features of your vehicle. For accurate and detailed instructions, it is always recommended to consult the owner’s manual.

VehicleYearReset Method
Chrysler2014-2015Press and hold OK button until oil life returns to 100%

Resetting the MAINTENANCE REQUIRED Dashboard on Nissan Vehicles

Nissan vehicle owners can easily reset the MAINTENANCE REQUIRED dashboard by following these simple steps:

  1. Turn the ignition key to the “RUN” position without starting the engine.
  2. Press the button on the bottom left of the instrument cluster until the “SETTING” screen is displayed.
  3. Highlight “MAINTENANCE” and press the button to enter.
  4. Select “ENGINE OIL” and press the button to enter.
  5. Highlight the “RESET” option and press to enter.
  6. Select the mileage and press the button to reset.

Please note that these instructions may vary depending on the specific make, model, and year of your Nissan vehicle. It is always recommended to consult the owner’s manual for accurate instructions.

Keep in mind that regular maintenance is crucial to keep your vehicle running smoothly and efficiently. Resetting the MAINTENANCE REQUIRED dashboard ensures that you stay on top of your vehicle’s maintenance schedule and receive timely reminders for essential services.

By following these instructions, Nissan owners can easily reset the MAINTENANCE REQUIRED dashboard, giving them peace of mind and confidence in the maintenance status of their vehicle.

Source Links

Similar Posts