Stop Windshield Wipers From Skipping: A Comprehensive Guide

Windshield wipers are essential components of any vehicle, and keeping them in good condition is a critical aspect of road safety. One of the most common issues car owners face with their windshield wipers is skipping; this can be frustrating and dangerous.

Here, we’ve compiled ten tips to help you prevent your windshield wipers from skipping:

1. Understand the Problem

Skipping wipers occur when they fail to clear the surface of the windshield entirely. The most common causes of skipping include dirty or damaged windshields and blades, wax or oil buildup on the windshield, loose wiper arm tension, and steep blade angles.

2. Clean Your Windshield

The primary step in preventing wiper skipping is to clean the windshield regularly. Use a high-quality glass cleaner for both the inside and outside surfaces to remove dirt and debris that can cause friction between the blades and windshield.

3. Replace Your Wiper Blades

Worn-out wiper blades are one of the leading causes of skipping. Typically, they should be replaced every six to twelve months, depending on usage and general wear and tear. Look for signs of cracks or tears on the edges or rubber blade parts like chipping or warping.

4. Check Your Wiper Arm Tension

Another reason for skipping is loose wiper arm tension that causes improper contact with the windshield’s surface. Use a wrench to tighten the nut on the arm for greater tension if necessary.

5. Adjust the Wiper Blade Angle

The angle at which you install your wiper blades can affect how well they clean your windscreen- too steep an angle can lead to skipping among other issues. Adjusting the blade angle will ensure maximum surface coverage and efficient cleaning.

6. Use a Windshield Treatment

Windshield treatments are hydrophobic coatings that repel water and enhance visibility by reducing smearing and wiper-blade noise. They come in sprays or wipes treatment forms, which are great for maintaining clean windshields daily.

7. Avoid Using Your Wipers on a Dry Windshield

Using your windshield wipers when the glass is dry can cause friction between the blades and the windshield surface leading to skipping or even permanent damage to the blades or windshield. Only use your wipers when water droplets have settled on the glass.

8. Avoid Using Harsh Chemicals

Certain chemicals can deteriorate a windshield’s surface, making it easier for dirt and other debris to stick, creating friction with the wiper blades while moving across the screen, leading to skipping. It’s best to use mild glass cleaners like vinegar solutions or ammonia-free products.

9. Park Your Car in The Shade

Parking your car in shaded areas can protect your vehicle from harsh weather fluctuations that can lead to wax or oil residue build-up forming on the glass’ surface affecting visibility and causing wiper skipping.

10. Replace Your Windshield

If your windshield has severe structural damage like cracks or pits, replacing it is essential for safe driving as this may cause skipping as well as impede visibility while driving.

How Often Should You Clean Your Windshield?

Keeping one’s windshield clean both inside and out is key to preventing streaking or sudden wiping of your premium quality wiper blades for no apparent reason- also known as “skipping.” Depending on weather factors such as humidity and location variables, windshields should get about three thorough cleanings a week in polluted urban areas or bi-weekly if rural areas aren’t so dusty. Areas with high annual rainfall may require frequent cleaning due to water spots left from runoff overtime. Keep a microfiber towel handy in storage space for wiping light dust buildup without much moisture – an infrequent task to cull debris from the windshield.

How To Install Wiper Blades

Installation of wiper blades can be simple; once they’re removed from their packaging, follow these steps:

  1. Lift the wiper arm away from the windshield and check for tension.
  2. Push the tab underneath the attachment point, leaving hold of it so the blade is no longer connected.
  3. Align installation points for new wipers into respective attachment pins until you hear a click sound.
  4. Lower wiper blade slowly back to the windshield’s surface, ensuring it’s securely held, and test its functionality.

Summary

Windshield wipers are crucial elements of any vehicle, aiding drivers in maintaining proper visibility on the road while driving safely. Skipping is a common problem caused by debris buildup on windshields, dirty or old wipers, loose arm tensions, steep blade angles, and other factors like harsh chemical cleaners.

To prevent skipping and maintain maximum efficiency, clean your windshield regularly using high-quality glass cleaners like ammonia-free products that won’t damage the surface and replace worn-out blades every 6-12 months. Furthermore, adjust your wiper blade angle to improve contact with your car’s windshield surface in addition to using a suitable hydrophobic coating that repels water and enhances visibility.

Similar Posts